Battery level for T-Beam

[buttim]

The T-Beam and other boards do not have an on board voltage divider, so you have to add a couple resistors to provide your own.
The T-Beam happens to use a battery charger chip (AXP192) that does support reading the battery voltage (probably in a quite precise way).
It would be interesting to support it so that hw modding the boards is no longer required.
The library for the chip is here: https://github.com/Xinyuan-LilyGO/LilyG ... 2X_Library

[IZ4PNN]

Hi Buttim...
yes, of course.
MySondy Go is designed to work with a specific board:

https://s.click.aliexpress.com/e/sKm64IHS

MySondy Go can work on many other boards that are not officially supported however in this case the compatibility could be partial.

It is not excluded that in a future update support for the AXP192 may be introduced.

[buttim]