Apparently if I modify sonde type and frequency in the app, the command sent via Bluetooth to the ESP32 does not include the / separator between commands as documented in the MySondyGoAPI.pdf document
mmmm.... very strange...
In this case only the frequency would have to change and the radiosonde change would not work.
I will check.
What do you use to read the bluetooth commands from the App?
73
Mirko Dalmonte (IZ4PNN)
MySondy Developers Team
I simply programmed an ESP32 to offer a Bluetooth connection under the name MySondyGo-XXXXXXXXXXXX. It dumps on (USB serial what comes from the BT connection. I must say I several times changed both frequency and radiosonde type on my radio and cant remember of any problem
Hardly. I simply dump every character that I get from the UART.
In a different case I do see the /s (the message body is: rs41.rxbw=1/m20.rxbw=4/m10.rxbw=0/pilot.rxbw=0/dfm.rxbw=5/freqofs=6)